Measuring Tool
This tool is great for measuring machines with smaller tires, larger tires,
rubber tracks, steel tracks, or any machine that has been modified.
In order to please your customers you want the bucket to fit just right! That is why Berlon has developed the Measuring Tool. This tool allows you to measure what the correct height of the mounting plate should be when welded on an attachment. The correct height of the mounting plate is vital to the machines performance.

Note: Boom must be on boom stops, tire pressure needs to be checked and brought to specs. Must be on level concrete/asphalt.
The process of measuring your machine is easy:

1. Hang the measuring tool from the quick tach

2. Put the quick tach at a 70º angle. This will be reached when the swinging pendulum hits the stop.

3. Loosen the set screw until the measuring rod drops down to the ground and retighten.

4. Measure the distance from the bottom tip of the measuring rod to the end of the tool body.

5. Add this measurement to your bucket order form to ensure your bucket is built the way it should be!
High Mount
With the Berlon Measuring Tool we are able to get the mount placed at the proper height on the back of the attachment. Gussets are placed along the mount to ensure the mounting plate is welded on to the reinforcement and curved bottom piece for maximum strength. Proper placement of the mount will allow the attachment to work correctly.
   

Berlon Industries: 434 Rubicon St Hustisford, WI 53034
Questions or Comments? Call: (920) 349-3580 Toll Free: (800) 899-3580 Email: Berlon@nconnect.net